Cleaning of Orbital Sanders

How to Properly Clean an Orbital Sander? Step by Step guide

When it comes to working, one needs to be focused and keen regarding the tools. The tools and equipment must be kept in immaculate condition to obtain maximum output from the device. Skilled or professional laborers take the utmost care of the tools used by them and ensure their proper condition.

Cleaning is one of the most tedious jobs, and one needs the perfect practice of it to master the act of cleaning. Specific tactics reduce the strain required for cleaning. So, here in this blog, we are going to have a look at how to clean your best random orbital sander. Cleanliness is one part, and taking precautions is another. So, we will also discuss various measures taken to increase the long life of the device.

Orbital Sander is a multipurpose device that is used for smoothing and sanding surfaces. It is assisted with sandpaper disc that helps to carry out actual work. So, now we know that the work that is done by the Sander is entirely professional and heavy, so maintenance is a prime issue that needs to be tackled.

Cleaning of Orbital Sander

Cleaning of Orbital Sanders

Hook and Loop pad of the Sander provide a real strength to the work, and since this part is more involved in the scene, it needs a good cleaning. When the pads are clogged with dirt and dust, the sanding disc won’t attach to the surface properly. Hence, we need a nit comb which is available at pharmacies for medical purposes to scratch out all the dirt from the pad. Thus, you clean the pad without hampering the loop. Once the pad is cleaned, the sandpaper discs will find it much easier to cling to the pad.

Dirt is an integral part of the sanding operation. Here it would help if you eliminated the dust before and after the sanding process is carried out. Dust gets trap in the grits of the Sander due to which the frictional losses occur, which decreases the efficiency of the Sander. One can use vacuum cleaning while removing the dust particles from the workplace. Due to vacuum, the dirt trapped between the grits is also removed, and also the dust which is in between the sandpaper and wood is eliminated. Hence, one experiences minimum frictional losses while carrying out the sanding operation and work efficiency is increased.

Many times, sanders are accompanied by collection ports. Motor and velcro are challenging to clean. Here, the dust collection plays are very crucial role since all the work that needs to be carried out is with the help of a motor. To avoid frictional losses and also corrosion, one must regularly clean the collection ports with the help of a fine brush. Cleaning will ensure proper care and long life of the motor and will also decrease the labor strain. Also, one can use air compressors due to which one can blow through the valves. Blowing the air inside the cavity of the Sander will clean the dust and also trap it into the collection valves. After the treatment of the compressor, oiling is a must.

Once you clean your Sander, it is ready to use for a job. Now that you have an efficient tool in your hand, you hardly need to apply pressure and force. But when you do so, make sure that it is optimum. The speed of work should be slow to ensure proper sanding, and these micro tips will assist you to have a proper finish of the job.

So, have a Happy Sanding! And don’t forget to clean it after use, also don’t over clean it to avoid corrosion.

About the Author:

Carlos has been a Travel freak since longer than he cares to admit and loves everything to do with travel gadgets. Whenever is something new in the tech, it loves to address the others.

You May Also Like

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.